Print in 3D
Main content start
We have three models of 3D printers available for you to use on a first-come, first-serve basis. We are currently accepting 3D print requests through this form. You must use our PLA filament which, currently, is free!
We recommend preparing (known as "slicing") your model for the Dremel 3D40 by utilizing the software found here.
DREMEL 3D40
Build plates and accessories are checked out at the Tech Desk.
- Build Volume: 10 x 6 x 6.7 inches (402 cubic inches)
- Build Plate: Not heated
- Z-Layer Resolution: 100-300 microns
- Material: PLA (only PLA is allowed in create:space)
- Compatible Print File Types: .g3drem, .gcode
- Connectivity: USB drive
DREMEL 3D45
Build plates and accessories are checked out at the Tech Desk.
- Build Volume: 10 x 6 x 6.7 inches (402 cubic inches)
- Build Plate: Heated
- Z-Layer Resolution: 100-300 microns
- Material: PLA (only PLA is allowed in create:space)
- Compatible Print File Types: .g3drem, .gcode
- Connectivity: USB drive
ULTIMAKER S5
File submission only.
- Build Volume: 13 x 9.4 x 11.8 inches (1442 cubic inches)
- Build Plate: Heated
- Z-Layer Resolution: up to 60 microns, 100 microns recommended
- Material: PLA (only PLA is allowed in create:space)
- Compatible Print File Types: .ufp
- Connectivity: USB drive